How to assembly the pole on my pedestal fan?

Here is a video that explains the assembly process for the pole assembly. You may also refer to the directions noted below. https://www.youtube.com/watch?v=_CVa70-TFGI

1. Take pipe assembly out of carton as shown. (Figure 1)
2. Loosen Height Adjustment Nut turning counter clockwise.
(Figure 2)
3. Raise Extension Pipe. (Figure 3)
4. Tighten Height Adjustment Nut turning clockwise. (Figure 4)

1. With a twisting motion, insert the end of the large diameter pipe into hole in Base. (Figure 5) Turning pipe while pushing will assure pipe is fully seated in Base.
2. For Height Adjustment:
    a) Loosen Height Adjustment Nut.
    b) Raise or lower Extension Pipe to desired height.
    c) Tighten Height Adjustment Nut.